One of the hardest yet most important sporting gear to dry is fishing and hunting waders. Experts recommend and law requires in many places that waders be cleaned AND DRIED INSIDE AND OUT after use. If you use waders, you know how difficult this can be. Do your part to protect our waters and prevent spread of invasive species by using a drying system that gently and completely dries the entire wader interior from toe to hip within a few hours.
The Puelche Dryer wader dryer has pegs that extend to 48" yet take up minimal or no floor space when not in use. Heavy duty yet attractive stainless steel that when not needed retracts into a a wall or a neat wall mounted box and plugs into standard 110V outlet. The perfect addition for the gear room of any hunting or fishing lodge.
If you or a loved one is a hunter or fisher, you will know that drying your waders or hip boots is important and often a bit difficult. Your waders can be dry and ready for the next day with an attractive wall mounted dryer that will look good out of season and again be ready when you come home with the game or catch of the day! Perfect if you hate the permanent porcupines or plastic junk that clutter up your beautiful mudroom. When your home is more than a locker room™, the Retracting Peg Dryer from Puelche is the answer.
Also available as an In-The-Wall design but it is not always possible to renovate a space to install it. So we came up with as thin, unobtrusive and attractive a model as we could that can be installed anywhere. 4.5"" thick, it hangs on the wall and plugs into a standard outlet. Excess cord can be hidden for a tidy look.
With a light push, the pegs rotate out for use. When drying is done they click back into place and take up minimal floor space while looking good doing so! We challenge you to find a better looking wader dryer!
- Waders and hip boots dry fast with forced gently warmed air flowing from open pegs.
- A built in timer and heat on/off switch provide simple controls.
- Constructed of durable stainless steel.
- On multiple pair units a patented valve opens the air flow only to the open pegs so warm air is not wasted when pegs are not used.
- Easily installs with a supplied cleat and screws.
- Plugs into standard outlet.
Wader On-The-Wall Boot Dryer from Puelche™ Dryer
Perfect for any hunter or fisher:
- Brushed stainless steel construction and finish
- 2 stainless steel pegs extendable to 48" with elbow and protective plastic tips to direct air to toes.
- Timer with 1, 2, 4, 8 hour settings.
- Heat on/off switch
- Heater with dual temperature protection. Max temp: 120 deg F (50C)
- Mounting cleat
Dimensions: 33.5" high x 12.5" wide x 4.5" deep. Pegs extend 19" from wall.
Power: 110VAC 500W
All dryers are assembled on order . Please allow 4-6 weeks for delivery. Contact us if you have specific configurations, requirements, or ideas for your place.
References for drying waders: