With all the fun things you do, you need a boot dryer for your special place, but you hate the permanent porcupines or plastic junk that clutter up your beautiful mudroom. When your home is more than a locker room™, the Retracting Peg Dryer from Puelche is the answer. You can have that dryer and the great looking mudroom with our patented design.
While our In-The-Wall design is the ultimate, it is not always possible to renovate a space to install it. So we came up with as thin, unobtrusive, and attractive a model as we could that can be installed anywhere. Less than 3" thick, it hangs on the wall and plugs into a standard outlet. Excess cord can be retracted for tidy look.
With a light push, the pegs rotate out for use. When drying is done they click back into place and take up minimal floor space while looking good doing so! We challenge you to find a better looking boot dryer!
- Shoes and boots dry fast with forced gently warmed air flowing from open pegs.
- A built in timer and heat on/off switch provide simple controls.
- Constructed of durable stainless steel.
- A patented valve opens the air flow only to the open pegs so warm air is not wasted when pegs are not used.
- Easily installs with a supplied cleat and screws.
- Plugs into standard outlet.
4 Pair On-The-Wall Boot Dryer from Puelche™ Dryer Custom Color
- Custom color powder coat painted
- 8 painted stainless steel pegs with protective plastic tips to direct air to toes of boots
- Built-in Timer with 1, 2, 4, 8 hour settings.
- Heat on/off switch
- Heater with dual temperature protection. Max temp: 120 deg F (50C)
- Mounting bracket
Dimensions: 56" high x 12 wide x 3" deep
Power: 110VAC 500W
When placing order visit www.ralcolor.com to select color code and use contact form to inform of color selection.